5
Case Descrip• on:
This Booklet specifi cally covers the
following models:
- TY3
- TY4
Descrip• on:
The ENTYCE-SC model series are mul• -deck, spot merchandisers designed for medium
temperature applica• ons such as: Deli/Dairy/Beverage. They are available as either remote type models,
which require separate condensing unit connec• ons, or self-contained models. Each self-contained model will
have it’s own condensing unit, factory installed beneath the display area of the case ready for opera• on when
electrical service is connnected.
Shipping Damage:
All equipment should be thoroughly examined for shipping damage before and during
unloading. This equipment has been carefully inspected at our factory and the carrier has assumed
responsibility for safe arrival. If damaged, either apparent or concealed, claim must be made to the carrier.
Apparent Loss or Damage:
If there is an obvious loss or damage, it must be noted on the freight bill or express
receipt and signed by the carrier’s agent; otherwise, carrier may refuse claim. The carrier will supply necessary
claim forms.
Concealed Loss or Damage:
When loss or damage is not appar
ent un• l a! er all equipment is uncrated, a claim
for concealed damage is made. Make request in wri• ng to carrier for inspec• on within 15 days, and retain all
packaging. The carrier will supply inspec• on report and required claim forms.
Loca• on/Store Condi• ons:
The refrigerated merchandisers have been designed for use only in air condi• oned
stores where temperature and humidity are maintained either
75°F ambient and 55% RH or 80°F aND 55% RH
. DO
NOT allow air condi• oning, electric fans, ovens, open doors or windows (etc.) to create air currents around the
merchandiser, as this will impair its correct opera• on.
Shortages:
Check your shipment for any possible shortages of material. If a shortage should exist and is found
to be the responsibility of Hussmann Chino, no• fy Hussmann Chino. If such a shortage involves the carrier,
no• fy the carrier immediately, and request an inspec• on. Hussmann Chino will acknowledge shortages within
ten days from receipt of equipment.
Hussmann Chino Product Control:
The serial number and shipping date of all equipment has been recorded
in Hussmann’s fi les for warranty and replacement part purposes. All correspondence pertaining to warranty
or parts ordering must include the serial number of each piece of equipment involved, in order to provide the
customer with the correct parts.
This equipment is to be installed
to comply with the applicable
NEC, Federal, State , and Local
Plumbing and Construction
Code ha ving jurisdiction.
ATTENTION
INSTALLER
/CHINO
A publication of HUSSMANN
®
Chino
13770 Ramona Avenue • Chino, California 91710
(909) 628-8942 FAX
(909) 590-4910
(800) 395-9229
Keep this booklet with the case at all times for future reference.
General Informa• on
Summary of Contents for CHINO TY3
