Husqvarna Viking Amber Air S 400, User Manual

Page: 4 / 44

Table of Content
ABOUT YOUR MACHINE 5
Machine Overview 5
Machine Overview - Inside Parts 6
Accessories 6
Connecting the Foot Control
and the Power Supply 7
Before Using Your Machine
for the First Time 7
Setting Up the Telescopic Thread Stand 7
Front and Flat Bed Extension Covers 8
Front Cover 8
Flat Bed Extension Cover 8
Waste Tray 8
Handwheel 8
Presser Foot Lifter
9
Changing the Presser Foot 9
Presser Foot Guide Lines 9
Needle Information 10
Changing the Needles 10
Checking the Needle 10
Upper Cutter 11
Deactivate the Upper Cutter 11
Reactivate the Moveable Upper Cutter 11
2-thread Overlock Converter 11
Engaging 11
Disengaging 11
GETTING READY TO SEW 12
General Threading Information 12
What Needle and Thread to Use ... 12
Placing the Thread Spools on the Spool Pins 13
Changing Thread 13
If the Thread Breaks While Sewing 13
Threading the Lower Looper 14
Threading the Upper Looper 16
Threading Loopers with the Looper Threading
Wire or Standard Thread 18
Using the Looper Threading Wire 18
Using a Standard Thread 19
Threading the Right Needle 20
Threading the Left Needle 22
Using the Needle Threader 24
Differential Feed Adjustment 25
Presser Foot Pressure Adjustment 25
Cutting Width Adjustment 26
Stitch Length Adjustment 26
Stitch Finger Lever Setting 26
Thread Tension Settings 27
SEWING 28
Stitch Overview 28
Explanation of Icons/Colors 28
4-Thread Overlock 28
3-Thread Overlock, Wide (and Narrow) 29
3-Thread Narrow Edge 29
3-Thread Rolled Edge 29
3-Thread Picot Edge 29
3-Thread Flatlock, Wide (and Narrow) 30
3-Thread Stretch Overlock 30
2-Thread Overedge, Wide (and Narrow) 30
2-Thread Wrapped Overlock, Wide (and Narrow) 31
2-Thread Rolled Edge 31
2-Thread Flatlock 31
Start Sewing 32
Pin Placement 32
Using Guide Lines 32
Securing the Thread Chain 33
Tie a Knot 33
Use a Sewing Needle 33
Use the Machine at the Start of a Seam 33
Use the Machine at the End of a Seam 33
Cutting the Seams Open 33
Gathering Using the Differential Feed 34
Rolled Edge Sewing 34
2-Thread Rolled Edge 34
3-Thread Rolled Edge / Narrow Edge 34
Flatlock Sewing 35
Standard Flatlock, Wide 35
Decorative Flatlock, Wide 35
Ladder Stitch 35
Sewing Corners 36
Outer Corners 36
Inner Corners 36
MACHINE MAINTENANCE 37
Storage 37
Servicing 37
Cleaning the Upper Cutter Area
37
Cleaning the Feed Teeth 37
Cleaning the Looper Threader Pipe 38
Oiling the Machine 39
Replacing the Upper Cutter 40
Troubleshooting 40
Specifications 42