A
A
B
B
ABOUT YOUR MACHINE –
9
Presser Foot Guide Lines
The toe of the presser foot has two guide lines.
The left guide line (A) is positioned at the left needle position.
The right guide line (B) is positioned at the right needle posi
-
tion.
Presser Foot Lifter
Raise the presser foot by raising the presser foot lifter at the
back of the machine. Pressing the lifter up puts the presser
foot in extra lift position.
Always raise the presser foot lifter when threading. When
raised, the tension disks open and the threading becomes easier.
Note: The machine will not sew if the presser foot is raised. Lower the
presser foot before starting to sew.
Changing the Presser Foot
Turn off the main power switch and unplug the machine.
• Raise the presser foot.
• Turn the handwheel toward you until the needles are at the
highest position.
•
Push the lever on the back of the presser foot ankle (A) to
release the presser foot. The foot will come off.
• Place the new foot with the pin right underneath the
groove of the ankle (B). Lower the presser foot lever to
attach the foot. Raise the presser foot lifter again to make
sure the foot is attached properly.
Summary of Contents for Viking Amber Air S 400
Page 1: ......
Page 43: ......
Page 44: ...4710583 26D 2019 KSIN Luxembourg II S a r l All rights reserved ...
