E
F
G
H
I
GETTING READY TO SEW –
23
Pull the thread down along the slit and pass it to the left
through the thread path (E).
Pass the thread from right to left around the take-up lever (F).
Pull out approximately 4˝ (10 cm) of thread from the needle
and slide it under the foot so that it runs in between the foot
and the upper cutter.
Close the front cover and lower the presser foot lifter.
Pass the thread through the left slit of the needle thread guide
(G).
Pass the thread through the needle bar thread guide from left
to right (H).
Thread the left needle from front to back (I).
Note: See page 24 to learn how to use the needle threader.
Summary of Contents for Viking Amber Air S 400
Page 1: ......
Page 43: ......
Page 44: ...4710583 26D 2019 KSIN Luxembourg II S a r l All rights reserved ...