Husqvarna TS 60, Operator'S Manual

Page: 16 / 80

16 –
English
STARTING AND STOPPING
Before starting
• Check that the machine is assembled correctly and do not
show any signs of damage. See instructions in the section
"Assembling and adjustments".
• Perform daily maintenance. See instructions in the section
"Maintenance".
Starting
• Push the green button marked "I" to start the machine.
• The water pump starts automatically when the machine is
started.
• Wait a few seconds for the water slots in the cart to be
filled with water before starting to cut.
Stopping
• Push the red button marked "O" to stop the machine.
• Make sure that the cutting blade can rotate freely until it is
completely stopped.
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before using the
machine.
Wear personal protective equipment. See
instructions under the ”Personal protective
equipment” heading.
Make sure no unauthorised persons are in
the working area, otherwise there is a risk of
serious personal injury.
Prevent unintentional starting of the motor.
Ensure the power switch is in the OFF-
position before connecting the machine to a
power source.
I O
I O