Husqvarna TC 85 2017, Owner'S Manual, Page: 74 / 98

15 TUNING THE ENGINE
72
15.1 Checking the play in the throttle cable
400192-11
–
Check the throttle grip for smooth operation.
–
Move the handlebar to the straight-ahead position. Move the throttle grip back-
wards and forwards to ascertain play

in the throttle cable.
Throttle cable play 2… 3 mm (0.08… 0.12 in)
» If the throttle cable play does not meet specifications:
–
Adjust the play in the throttle cable. ( p. 72)
Danger
Danger of poisoning Exhaust gases are toxic and inhaling them may
result in unconsciousness and death.
–
Always make sure there is sufficient ventilation when running the
engine.
–
Use an effective exhaust extraction system when starting or running
the engine in an enclosed space.
–
Start the engine and let it idle. Move the handlebar to and fro over the entire
steering range.
The idle speed should not change.
» If the idle speed changes:
–
Adjust the play in the throttle cable. ( p. 72)
15.2 Adjusting the play in the throttle cable
Preparatory work
–
Remove the seat. ( p. 41)
–
Turn tap handle

on the fuel tap to the OFF position.
(Figure S00484-10 p. 12)
–
Remove the fuel tank. ( p. 45)
–
Check the routing of the throttle cable. ( p. 51)
L02004-10
Main work
–
Move the handlebar to the straight-ahead position.
–
Push back sleeve  .
–
Ensure that the throttle cable sleeve is pushed all the way into barrel adjuster

.
–
Loosen nut

.
400192-11
–
Turn adjusting screw

in such a way there is throttle cable play

in the throt-
tle grip.
Guideline
Throttle cable play 2… 3 mm (0.08… 0.12 in)
–
Tighten nut

.
–
Slide on sleeve

.
Finishing work
–
Check the play in the throttle cable. ( p. 72)
–
Install the fuel tank. ( p. 46)
–
Mount the seat. ( p. 41)