Husqvarna TC 85 2017, Owner'S Manual, Page: 37 / 98

11 SERVICE WORK ON THE CHASSIS
35
11.8 Installing the fork protector
E00257-10
–
Position the fork protector on the right fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the fork protector on the left fork leg. Mount and tighten screws

.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten screws

.
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 32)
–
Remove the front wheel. ( p. 65)
–
Remove the fork legs. ( p. 33)
–
Remove the start number plate. ( p. 39)
–
Remove the front fender. ( p. 39)
–
Remove the handlebar cushion.
E00206-10
Main work
–
Pull fuel tank breather

out of the steering stem.
–
Remove nut

. Remove screw

, pull off the upper triple clamp with the han-
dlebar in an upward direction, and hang it to the side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
E00207-10
–
Remove protective ring

.
–
Take off the lower triple clamp with the steering stem in a downward direction.
–
Remove the upper steering head bearing.