Husqvarna T 8600, Operator'S Manual

Page: 8 / 48

• Do not make a hole in the Hepa filter. A broken Hepa
filter can disperse dust.
Assembly
Introduction
CAUTION: Only use extension cable with
correct rated value for this product. Only
connect to an outlet that is correct grounded.
CAUTION: Always clean the prefilter before
change of bag collection system.
General
Do a check that the following accessories are included:
• The hose with end fittings
• Steel tube
• Floor Nozzle
• Cable ties
If 1 of the parts is missing, speak to your local
Husqvarna service agent .
Make sure to dispose the package and the used product
components in correct procedure. Refer to local disposal
regulations. Make sure to recycle.
Accessories
Extension cables
WARNING: Only use an extension cord that
can handle the machines rated current with
corresponding plugs.
Approved for machines > 250V: SO, SOO, ST, STOand
STOO
Approved for machines < 250 V: All types
Model Distri-
bution
box
A B C D E F G H
T7500
230V
NO 1
T7500
230V DIST
YES 1 1
T8600
480V
YES 1 1 1
T10000
480V
YES 1 1 1
T18000
480V
YES 1 1
HusqvarnaT-Line Dust Extractor are supplied with
Hubbell inlets and receptacles.
Part no Hubbell part no Standard Description
A HBL4100R9W IEC 60309 FEMALE RECEPTACLE, 100A, 3-PHASE, 250V, 4 Wire.
B HBL4100B9W IEC 60309 INLET MALE, 100A, 3-PHASE, 250V 4 Wire.
C CS8175 Twistlock
®
INLET MALE, 50A, 3-PHASE, 480V, 4 Wire, Grounding.
D CS8169 Twistlock
®
RECEPTACLE FEMALE, 50A. 3-PHASE, 480V, 4 Wire,
Grounding.
8 877 - 003 -