English –
35
6017-100
MAINTENANCE
Checking the Tyre Pressures
The tyre pressure should be 60 kPa / 0.6 bar /
9 PSI on all wheels. The highest permitted
pressure is 100 kPa / 1.0 kp/cm
2
/ 14 PSI).
8009-370
Fuses
The main fuse is placed in a detachable holder
under the battery case’s cover, in front of the
battery.
Type: Flat pin, 15 A.
The fuse for the power outlet is placed under the
ignition switch, behind the side plate on the control
panel.
Type: Flat pin, 7.5 A.
Do not use any other type of fuse when replacing.
A blown fuse indicates that the mounting has burnt
off. Pull the fuse from the holder when replacing.
The fuse is there to protect the electrical system. If
it blows again shortly after replacement, it is due to
a short circuit, which must be fixed before the
machine can be put into operation again.
IMPORTANT INFORMATION
Different air pressure in the front tyres will
result in the blades mowing the grass at
different heights.
8009-586
Summary of Contents for Rider Pro 15
