29
Functions and GraphicDisplay
Programming
With Platinum 770 you can program
stitches and letters into combinations.
Save the programmed combinations
in the permanent memories. A pro-
grammed stitch combination that is
saved is retained in the memory even
when the machine is turned off.
PROG mode
When programming, the Sewing Advisor
is not active. Touch
FUNC
to activate the
PROG
mode.
Memories
Touch
M
to select memory. The M and
the number that follows indicates the
active memory. There are four different
memories (M01 to M04). Each of the
four memories holds up to 55 stitches,
which means that you can program and
save up to 220 stitches and/or letters.
When activating
PROG
, the last used
memory is active. To save your pro-
grammed combination in a memory
other than the active, select the memory
number fi rst, before programming any
stitches. The programmed combination
will be saved automatically in memory.
Move the Cursor
The cursor on the GraphicDisplay is
under the active programming space.
Use the selection buttons to move the
cursor sideways.
Delete Stitches or Programs
If there is a stitch or letter combination
in the selected memory that is displayed
in the programming area, touch
CLR
to
clear the memory. To reload a deleted
program, touch
CLR
again before you
enter new stitches.
Note
:
When programming, you have
the possiblity to decrease the dis-
tance between two letters. Touch
<
when the numbers/special characters menu
is active, to program short reverse stitches.
The more reverse stitches you program the
shorter the distance to the next entered
letter.
Note
:
Both the stop and fi x functions
can be programmed. The stop func-
tion is programmed when you want
to sew only one sequence of your program.
The fi x function can be used if you want to
fi x at the end or in the begining of a stitch
within the programmed combination.
