18
Functions and GraphicDisplay
NEEDLE
STOP
UP
/
DOWN
is used to
move the needle down or up
and/or to set the needle stop
position up or down.
NOTE
:
When sewing, the needle can
be raised/lowered by lightly tapping
the foot control.
STOP
is used to conclude a stitch.
Your Platinum 770 fastens the
thread and stops automatically
when a stitch sequence has been
completed.
STOP
is cancelled
when you touch the button again
or by selecting a new stitch.
When
STOP
is active, an icon is
shown on the GraphicDisplay. The
stop-function can be programmed.
FIX
is used to tie off stitches.
When the button is pressed, an
icon is visible on the Graphic-
Display. By pressing the button
again the function can be turned
off. When beginning to sew,
Platinum 770 sews a few tie off
stitches and goes on with the
selected stitch. Touch
FIX
while
sewing and Platinum 770 sews
a few tie off stitches and stops
automatically. The fi x-function can
be programmed.
Touch
+
SPEED
or
-
SPEED
to
increase or decrease the sewing
speed.
All stitches in Platinum 770 have
a pre-set, recommended sewing
speed. When you select a stitch
Platinum 770 automatically sets
the correct sewing speed.
If you have reduced the speed
manually, your setting is retained
and kept for all stitches until your
Platinum 770 is turned off.
START
/
STOP
is touched when you
want to run the machine without
using the foot control. Touch
START/STOP to begin and touch
it again to stop sewing.
REVERSE
is pressed to sew in
reverse. When the button is
released, Platinum 770 sews for-
wards. The longest reverse stitch
length is 3 mm.
For permanent reverse, touch
the button twice in quick succes-
sion before starting to sew. The
reverse sewing is indicated by an
icon on the GraphicDisplay.
Platinum 770 sews in reverse
until you touch the button again.
Function Buttons
