9
Learn your Platinum 770
Threading for Twin Needle
Switch off the main switch.
1. Insert a twin needle. See page 12
“Changing the needle”.
2. Use a second thread spool or wind
a bobbin with the thread you are
going to use as the second upper
thread.
3.
L
EFT
NEEDLE
(
RED
):
Thread the
machine as explained on page 7 and
check to ensure that the thread lies
between the
inner
thread tension
discs, and
inside
the last thread
guide. Thread the left needle.
4.
R
IGHT
NEEDLE
(
BLUE
):
Pull up the
auxiliary spool pin. Place the large
spool holder and a felt pad on the
spool pin.
5. Place the thread spool or the bobbin
with the second thread on the spool
pin.
6. Thread the machine as before but
this thread should lie between the
outer thread tension discs, and out-
side the last thread guide. Thread
the right needle.