• Attach the lifting equipment at the lifting point of the
safety frame. A label on the product identifies the
correct position.
A
B
WARNING: Do not use metal hooks,
chains or other lifting equipment with
rough edges that can cause damage to
the lifting eye.
WARNING: Do not lift a damaged
product. Make sure that the safety frame
(A) and the vibration damping units (B)
are correctly installed and not damaged.
To safety the product to a transportation
vehicle with tie-down straps
• Put 2 straps (A) around the bottom plate.
A
a) Put 1 strap around the front of the bottom plate
and attach the strap to the vehicle.
b) Put 1 strap around the rear of the bottom plate
and attach the strap to the vehicle.
Storage
• Remove all fuel from the fuel tank before you put the
product in storage for a long period of time. Discard
the fuel at an applicable disposal location.
• Clean the product before storage. Remove oil and
dust from the rubber parts.
• Clean the air filter before storage.
• Carefully pull the starter rope handle until there is a
small resistance. This closes the valves and makes
sure that moisture cannot go into the engine
cylinder.
• Put a protective cover on the product.
• Keep the product in a dry and frost free area.
• Keep the product in a locked area to prevent access
for children or persons that are not approved.
Disposal
• Obey the local recycling requirements and applicable
regulations.
• Discard all chemicals, such as engine oil or fuel, at a
service center or at an applicable disposal location.
• When the product is no longer in use, send it to a
Husqvarna dealer or discard it at a recycling
location.
1096 - 003 - 06.04.2020
13
