ASSEMBLING AND ADJUSTMENTS
10 – English
How to tension the chain
•
If the play between drive link and bar is bigger than 12
mm (1/2”) (
A
), the chain is too loose and must be
tightened.
•
Loosen the bar nuts that hold the cover. Use the
combination tool. Then tighten the bar nuts by hand as
tight as you can.
•
Stretch the diamond chain by tightening the chain
tensioning screw using the combination tool. Tighten
the diamond chain until it does not sag from the
underside of the bar.
•
Use the combination tool to tighten the bar nuts while
lifting the tip of the bar at the same time. Check that
you can pull the diamond chain round freely by hand
and that it does not sag from the underside of the bar.
Pipe clamp (Accessory)
For use with Husqvarna K 970 Ring and Chain and K
6500 Ring and Chain. A convenient accessory for
producing straight, precise cuts in concrete pipes.
!
WARNING! A slack diamond chain may
jump off and cause serious or even fatal
injury.
A
