PRESENT
A
TION
4
–
English
Dear Customer
,
Thank y
ou for choosing a Husqvarna product!
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. A
purchase of one of our products gives you access to
professional help with repairs and services. If the retailer
who sells your machine is not one of our authorized
dealers, ask him for the address of your nearest service
workshop.
This operator’s manual is a valuable document. Make
sure it is always at hand at the work place. By following its
content (operating, service, maintenance etc.) the life
span and the second-hand value of the machine can be
extended. If you will sell this machine, make sure that the
buyer will get the operator´s manual.
More than 300 y
ears of innovation
Husqv
arna AB is a Swedish company based on a tradition
that dates back to 1689, when the Swedish King Karl XI
ordered the construction of a factory for production of
muskets. At that time, the foundation was already laid for
the engineering skills behind the development of some of
the world's leading products in areas such as hunting
weapons, bicycles, motorcycles, domestic appliances,
sewing machines and outdoor products.
Husqvarna is the global leader in outdoor power products
for forestry, park maintenance and lawn and garden care,
as well as cutting equipment and diamond tools for the
construction and stone industries.
Owner responsibility
It is the o
wner’s/employer’s responsibility that the operator
has sufficient knowledge about how to use the machine
safely. Supervisors and operators must have read and
understood the Operator’s Manual. They must be aware
of:
•
The machine’s safety instructions.
•
The machine’s range of applications and limitations.
•
How the machine is to be used and maintained.
National legislation could regulate the use of this
machine. Find out what legislation is applicable in the
place where you work before you start using the machine.
The man
ufacturer’s reservation
Subsequent to pub
lishing this manual Husqvarna may
issue additional information for safe operation of this
product. It is the owner’s obligation to keep up with the
safest methods of operation.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify
the design and appearance of products without prior
notice.
For customer information and assistance, contact us at
our website: www.husqvarna.com
Design and f
eatures
This Husqv
arna diamond chain power cutter is a portable
handheld cut-off machine designed to cut hard materials
like concrete masonry and stone and should not be used
for any purpose not described in this manual. Safe
operation of this product requires the operator to read this
manual carefully. Ask your Husqvarna dealer if you need
more information.
Some of the unique features of your product are
described below.
Smar
tCarb™
Built-in automatic fi
lter compensation maintains high
power and reduces fuel consumption.
Dura Star
ter™
Dust sealed star
ter unit, where the return spring and the
pulley bearing are sealed which makes the starter
virtually maintenance free and even more reliable.
X-T
orq®
The X-T
orq® engine provides a more accessible torque
for a wider range of speeds which results in maximum
cutting capacity. X-Torq® reduces the fuel consumption
by up to 20% and the emissions by up to 60%.
EasyStar
t
The engine and star
ter are designed to ensure quick and
easy starting of the machine. Reduces the pull resistance
in the starter cord by up to 40%. (Reduces the
compression during starting.)
Air pur
ge
When y
ou push the air purge diaphragm, fuel is pumped
through to the carburettor. Fewer pulls are required for
starting, meaning the machine becomes easier to start.
Effi
cient vibration damping system
Effi
cient vibration dampers spare arms and hands.
Lar
ge cutting depth
Giv
es a cutting depth of 450 mm (18”). Cuts can be made
efficiently from a single direction. Small openings with
dimensions of 11x11 cm (4x4 ") can be cut which is
perfect for cutting openings with irregular shapes.
W
ater cooling and dust management
The cutting equipment is pro
vided with water cooling and
dust management system for wet cutting and dust
suppression.
