assembly. Do not replace one shoe from a different
clutch as this causes bad balance.
1
The inner diameter of the clutch drum must not be more
than 79.8 mm. Replace if necessary with a new clutch
drum.
2
6.13.3 To assemble the clutch
WARNING: Risk of injury. Assemble the clutch
with the correct tightening torque. Use a torque
wrench.
1. Tighten the clutch with a torque of 37–43 Nm.
6.13.4 To remove the clutch springs
1. Put a large screwdriver in each spring end.
2. Expand the spring using circlip pliers and remove
the spring.
6.13.5 To install the clutch springs
1. Put a large screwdriver in each spring end.
2. Expand the spring using circlip pliers and install the
spring.
6.13.6 To examine the clutch shoes and hub
CAUTION: Do not lubricate the clutch.
1. Make sure the shoes move easily in their grooves.
Clean if necessary.
58 - Repair and servicing
701 - 002 -