Husqvarna HUV4210 2005 Series, Maintenance Service Manual

Page: 59 / 60

ACCELERATOR AND BRAKE PEDAL GROUP Pedal Group Adjustment – Electric Vehicles
2005-2006 HUV4210-G, 4210-E, 4210-GXP, 4210-EXP Maintenance and Service Manual Page 5-19
5
5. Adjust accelerator pedal height.
5.1. Loosen the nut and bolt (Figure 5-28, Page 5-19) securing the accelerator pedal to the pivot plate.
5.2. Clamp the accelerator pedal adjustment tool (Husqvarna 603 00 18-32) to the accelerator pedal,
with the end marked accelerator pedal height closest to the floorboard (Figure 5-29, Page 5-19) .
Press the accelerator pedal until the end of the tool rests against the floorboard; pedal height
should be 5-5/8 inches (14.3 cm). Use a rubber strap to hold pedal in position against the floorboard
and then tighten nut to 26 ft-lb (35.3 N·m).
6. Adjust the brakes. See Brake Adjustment, Section 6, Page 6-8.
Figure 5-27 Brake Rod Adjustment Figure 5-28 Accelerator Pedal Height Adjustment
Figure 5-29 Accelerator Pedal Height Adjustment
ST
OP
PARK
GO
ACCELERATOR PEDAL
ADJUSTMENT TOOL
(CCI P/N 101871001)
RUBBER STRAP
GO
ST
OP
PARK
MICRO BR
EAK POINT
MICRO BR
EAK POINT