9 SERVICE SCHEDULE
30
after every race
Every 40 operating hours
Every 30 operating hours
Every 20 operating hours
Every 10 operating hours
Once after 1 operating hour
Check all hoses (e.g. fuel, cooling, bleeder, drainage hoses, etc.) and sleeves for
cracking, tightness, and correct routing.
○
●
●
●
●
●
Check the antifreeze and coolant level. (
○
●
●
●
●
●
Check the cables for damage and for routing without kinks.
●
●
●
●
●
Check that the throttle cables are undamaged, routed without sharp bends, and
set correctly.
○
●
●
●
●
●
Clean the air filter and air filter box.
●
●
●
●
●
Change the glass fiber yarn filling of the main silencer.
●
●
Service the fork.
●
Perform the shock absorber service.
●
Check the screws and nuts for tightness.
○
●
●
●
●
●
Change the fuel screen.
○
●
●
●
●
●
Check the fuel pressure.
●
●
●
●
●
Check idle speed.
○
●
●
●
●
●
Final check: Check the vehicle for operating safety and take a test ride.
○
●
●
●
●
●
Read out the fault memory after the test ride using the Husqvarna Motorcycles
diagnostics tool.
○
●
●
●
●
●
Make the service entry in
Husqvarna Motorcycles Dealer.net
and in the Service
& Manufacturer Warranty Booklet.
○
●
●
●
●
●
○
One-time interval
●
Periodic interval
9.3
Recommended work
Annually
Every 100 operating hours
Every 50 operating hours
Once after 20 operating hours
Once after 10 operating hours
Change the front brake fluid.
●
Change the rear brake fluid.
●
Change the hydraulic clutch fluid.
●
Lubricate the steering head bearing.
●
Service the fork.
○
Perform the shock absorber service.
○
Change the fuel filter.
●
Perform minor engine service, engine has been installed. (Change the spark plug and
spark plug connector. Change the piston, check and measure the cylinder; check the
cylinder head. Check the camshaft, rocker arm and rocker arm shafts. Check timing
assembly.)
●
●
https://www.motorcycle-manual.com/
