SERVICE WORK ON THE ENGINE 17
111
K01072-10
–
Mount and tighten screw plug
3
with the O-ring.
Guideline
Screw plug, oil
screen
M20x1.5
15 Nm (11.1 lbf ft)
–
Mount and tighten oil drain plug
1
with the magnet and a
new seal ring.
Guideline
Oil drain plug with
magnet
M12x1.5
20 Nm (14.8 lbf ft)
K01073-10
–
Remove screws
5
. Remove the oil filter cover with the O-
ring.
K01074-10
–
Pull oil filter
6
out of the oil filter housing.
Lock ring plier (51012011000)
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
K01073-11
–
Lay the motorcycle on its side and fill the oil filter housing to
about
⅓
full with engine oil.
–
Place the new oil filter into the housing.
–
Lubricate the O-ring of the oil filter cover and mount it with
the oil filter cover
7
.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover M6
10 Nm (7.4 lbf ft)
–
Stand the motorcycle upright.
401955-12
–
Remove filler plug
8
from the clutch cover together with the
O-ring, and fill up with engine oil.
Engine oil
1.20 l
(1.27 qt.)
Engine oil
(SAE 10W/50)
(
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
–
Mount and tighten the filler plug together with the O-ring.
https://www.motorcycle-manual.com/
