17 SERVICE WORK ON THE ENGINE
110
Preparatory work
–
Park the motorcycle on a level surface.
K01068-10
Main work
–
Place an appropriate container under the engine.
–
Remove oil drain plug
1
with the magnet and seal ring.
K01069-10
–
Remove screw plug
2
with the short oil screen and the O-
rings.
Info
Do not remove screw
A
.
K01070-10
–
Remove screw plug
3
with the long oil screen
4
and the
O-rings.
–
Completely drain the engine oil.
–
Thoroughly clean the parts and sealing surfaces.
K01069-11
–
Mount and tighten screw plug
2
with the short oil screen
and the O-rings.
Guideline
Screw plug, oil
screen
M20x1.5
15 Nm (11.1 lbf ft)
K01071-10
–
Position long oil screen
4
with the O-rings on a pin wrench.
–
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
–
Push the oil screen all the way into the engine case.
https://www.motorcycle-manual.com/
