Husqvarna FC 450 2018, Repair Manual

Page: 250 / 335

18 CLUTCH
248
If there is damage or wear:
-
Change the spring washer.
Check the contact surface of clutch pressure cap @ for damage and wear.
If there is damage or wear:
-
Change the clutch pressure cap.
Check clutch center
4B,
for damage and wear.
If there is damage or wear:
-
Change the clutch center.
Check damping rubber pieces G) for damage and wear.
If there is damage or wear:
-
Change the damping rubber pieces.
Check inner clutch hub G) for damage and wear.
If there is damage or wear:
-
Change the inner clutch hub.
Check the thrust surfaces of the clutch facing discs in clutch basket
48
for damage and wear.
If there is damage or wear:
-
Change the clutch facing discs and the clutch basket.
Check needle bearings
4B,
and collar bushing
48
for damage and wear.
If there is damage or wear:
-
Change the needle bearings and collar bushing.
Check intermediate clutch discs €1) for damage and wear.
If the intermediate clutch discs are not level and are pitted:
-
Change all intermediate clutch discs.
Check clutch facing discs .. for discoloration and scoring.
If there is discoloration or scoring:
-
Change all clutch facing discs.
Check the thickness of the clutch disc pack.
Clutch disc pack - thickness
Wear limit � 26.4 mm (� 1.039 in)
If the clutch disc pack does not meet specifications:
-
Change the clutch disc pack.
Mount collar sleeve
48
and needle bearing �.