Husqvarna DM280, Operator'S Manual

Page: 13 / 60

English
– 13
TECHNICAL DATA
Note 1: Noise emissions in the environment measured as sound power (L
WA
) conforming to EN 12348.
Note 2: Noise pressure level according to EN 12348. Reported data for noise pressure level has a typical statistical dispersion
(standard deviation) of 1.0 dB(A).
Note 3: Vibration level according to EN 12348. Reported data for vibration level has a typical statistical dispersion (standard
deviation) of 1 m/s
2
.
DM 280
Electric motor Single-phase
Rated voltage, V 230/120
Rated output, W
230V 2700W
120V 2400W
Rated current, A
230V 13A
120V 20A
Weight, kg 13
Max. diameter drill bit, mm/inch
Low speed 350/14
High speed 250/10
Water cooling
Spindle thread G 1 1/4”
Water connector G 1/4”
Water pressure - max, bar 8
Noise emissions (see note 1)
Sound power level, measured dB (A) 112
Sound power level, guaranteed dB(A) 113
Sound levels (see note 2)
Sound pressure level at the operators ear, dB(A) 98
Vibration levels, a
hv
(see note 3)
Handle, m/s
2
1,0
Low speed
Gear
Drill bit speed with
load, rpm Drill bit load without
load, rpm Recommended drill bit
size, mm Recommended drill bit
size, inch
1 250 310 200-350 8-14
2 550 690 100-200 4-8
3 950 1190 50-100 2-4
High speed
Gear
Drill bit speed with
load, rpm Drill bit load without
load, rpm Recommended drill bit
size, mm Recommended drill bit
size, inch
1 360 450 150-250 6-10
2 800 1000 75-150 3-6
3 1380 1730 25-75 1-3