Introduction
Product description and intended use
The product Husqvarna Climbing Rope 11.5/11.8 mm is
a climbing rope made of synthetic fibers. The product
has an end connection eye at one end. The product is
used as a component in rope-assisted work, such as
descender devices, work positioning systems and fall
arrest systems.
Do not use the product as lifting equipment as specified
in EU directive 2006/42/EC.
Symbols and markings
Symbol/marking
Explanation
A xxx *
Type, diameter in mm. Example: A 10.5 = Type A rope, 10.5 mm diameter.
EN 1891:1998 *
Standard for low stretch kernmantle ropes.
Ser. no. *
Unique production number.
ANSI Z133-2017
Standard for arboricultural operations.
Length
Only for customized ropes. Length of the rope in m.
YY/MM *
Year/month of manufacture.
The CE mark certifies compliance with the requirements of regulation (EU)
2016/425. The number identifies the testing institute. Refer to
.
Splice
Name of the eye end connection.
*
Manufacturer.
Read the operator's manual before you use the product.
The European standard symbols for textile care and washing of textiles are used.
* = To comply with EN 1891:1998, these symbols/markings must be included on labels at each end of the product.
Product liability
The manufacturer is not responsible for damages that
occur during or after the use of the product if:
• the product is incorrectly used.
• the work positioning system is incorrectly
assembled.
Safety
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
Used if there is a risk of
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
CAUTION:
Used if there is a risk of
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
1779 - 001 - 01.03.2022
3
