Maintenance Schedule
The following is a list of maintenance procedures that must be
performed on the machine. For those points not described in
this manual, visit an authorized service workshop. An annual
service carried out by an authorized service workshop is
1)
First change after 8-10 hours. When operating with a heavy load
or at high ambient temperatures, replace every 50 hours.
2)
In dusty conditions, cleaning and replacement are required more
often.
3)
Performed by authorized service workshop.
●
= Described in this manual
♦
= Not described in this manual
■
= Refer to the engine manufacturer's manual
recommended to maintain your machine in the best possible
condition and to ensure safe operation.
Read
General Maintenance
in the
Safety
section.
MAINTENANCE
Daily
At least
once
each
year
Maintenance interval
in hours
Before
After
25
100
300
Check the park brake
●
Check the engine’s oil level (every refueling)
■
Check the safety system
●
Check for fuel and oil leakages
♦
Check/clean the engine’s cooling air intake
■
Check the mower deck
●
Check for loose hardware (screws, nuts)
●
Clean under the mower deck
●
●
●
●
Start the engine and blades, listen for unusual sounds
♦
Check for damage
♦
♦
♦
♦
Thoroughly clean around the engine
♦
♦
♦
♦
Clean around belts, belt pulleys
♦
♦
♦
♦
Check the tire pressures
●
●
●
●
Check battery connections
●
●
●
●
Sharpen
3)
/ Replace mower blades
●
●
●
●
Clean the engine’s cooling air intake
2)
■
■
■
■
Clean the air cleaner’s foam pre-filter
2)
■
■
Clean the air cleaner’s paper filter cartridge
2)
■
■
Check/adjust the park brake
●
●
●
●
Inspect muffler/spark arrestor
♦
♦
♦
♦
21
MAINTENANCE
Summary of Contents for 967277502
Page 33: ...33 SCHEMATIC ...
Page 42: ...42 SERVICE JOURNAL Action Date mtr reading stamp sign ...
Page 43: ......
Page 44: ...www husqvarna com 115 666627 Rev A 2013 11 15 ...
