MAINTENANCE
English
–
31
•
Hot air is then supplied to the carburettor from the
muffler.
•
Fit a cover over the starter in snowy conditions.
Lubrication of wire
(545FXT)
NOTE!
The wire is pre-lubricated and does not need to be
lubricated again until required.
•
Remove the protective cover.
•
Unscrew the cylinder cover and make sure the rubber
bellows on the wire has not been expanded too much.
•
Unscrew the plug on the grease nipple.
•
Use antifreeze spray with a 2 mm spray tube. Spray in
short bursts.
•
Fit covers.
IMPORTANT! The machine MUST be returned to its
standard design at temperatures warmer than 5
°
C .
Otherwise there is a risk of overheating resulting in
serious engine damage.
IMPORTANT! Any maintenance other than that
described in this manual must be carried out by your
servicing dealer (retailer).
