Husqvarna 545FR Operator'S Manual Download Page 37

Page: 37 / 43

English – 37

TECHNICAL DATA

EC Declaration of Conformity

We,

Husqvarna AB,

SE-561 82 Huskvarna, Sweden, tel: +46-36-146500, declare that the brush cutters

Husqvarna

545FR, 545FX/FXT, 545RX and 545RXT

with serial numbers dating from 2016 onwards (the year is clearly stated on

the rating plate, followed by the serial number), comply with the requirements of the COUNCIL’S DIRECTIVE:

- of May 17, 2006 ”relating to machinery”

2006/42/EC

- of February 26, 2014 ”relating to electromagnetic compatibility”

2014/30/EU

- of May 8, 2000 ”relating to the noise emissions in the environment”

2000/14/EC

. Conformity assessment according

to Annex V. For information relating to noise emissions, see the Technical data chapter.

- of June 8, 2011 ”on the restriction of the use of certain hazardous substances in electrical and electronic equipment”

2011/65/EU

The following standards have been applied:

EN ISO 12100:2010, EN ISO 11806:2011, EN ISO 14982:2009, CISPR 12:2007+A:2009

EN 50581:2012

SMP Svensk Maskinprovning AB, Box 7035, SE-750 07 Uppsala, Sweden, has performed voluntary type examination
on behalf of Husqvarna AB. The certificates are numbered:

SEC/11/2294

- 545FR,

SEC/11/2293

- 545RX, RXT,

SEC/11/2292

- 545FX, 545FXT.

SMP Svensk Maskinprovning AB has also verified agreement with appendix V of the council’s directive 2000/14/EG. The
certificates have the numbers:

01/164/073

- 545FR,

01/164/073

- 545RX, RXT,

01/164/072

- 545FX, 545FXT.

Huskvarna March 30, 2016

Per Gustafsson, Development manager (Authorized representative for Husqvarna AB and responsible for technical
documentation.)

545FR

Approved accessories

Type

Cutting attachment guard, Art. no.

Centre hole in blades/cutters, Ø 25,4
mm

Output shaft thread M12

Grass blade/grass cutter

Multi 255-3 (Ø 255 3 teeth)

537 28 85-01 / 544 46 43-01

Multi 275-4 (Ø 275 4 teeth)

537 28 85-01 / 544 46 43-01

Multi 300-3 (Ø 300 3 teeth)

537 28 85-01 / 544 46 43-01

Saw blade

Maxi XS 200-22 (Ø 200 22 teeth)

537 31 09-01

Scarlet 200-22 (Ø 200 22 teeth)

537 31 09-01

Plastic blades

Tricut Ø 300 mm (Separate blades
have part number 531 01 77-15)

537 28 85-01 / 544 46 43-01

Trimmer head

Trimmy S II (Ø 2.4 - 3.3 mm cord)

503 95 43-01 / 544 46 43-01

Auto 55 (Ø 2.7 - 3.3 mm cord)

503 95 43-01 / 544 46 43-01

T45x (Ø 2.7 - 3.3 mm cord)

503 95 43-01 / 544 46 43-01

Support cup

Fixed

Shredder blade

544 02 65-02

Summary of Contents for 545FR












































Search results

Summary of Contents for 545FR

Reviews:

Related manuals for 545FR

Brands by name

Popular brands

Husqvarna 545FR, Operator'S Manual

Search results

Summary of Contents for 545FR

Reviews:

Related manuals for 545FR

Brands by name

Popular brands