To stop the product
1. Release the power trigger or the power trigger
lockout.
2. Push the start/stop button until the green LED is off.
3. Push the release buttons on the battery and pull the
battery out.
Maintenance
Introduction
WARNING: Read and understand the safety
chapter before you do maintenance on the
product.
Maintenance schedule
WARNING: Remove the battery before you
do maintenance.
The following is a list of the maintenance steps that you
must do on the product. See
Maintenance on page 28
for more information.
Maintenance
Daily
Weekly
Monthly
Clean the external parts of the product with a dry cloth. Do not use water.
X
Examine that the start and stop button works correctly and is not damaged.
X
Make sure that the power trigger and the power trigger lockout function correctly
from a safety point of view.
X
Make sure that all controls work and are not damaged.
X
Keep the handles dry, clean and free from oil and grease.
X
Make sure that the cutting attachment is not damaged. Replace the cutting at-
tachment if it is damaged.
X
Make sure that the cutting attachment guard is not damaged. Replace the cut-
ting attachment guard if it is damaged.
X
Make sure that the screws and nuts are tight.
X
Make sure that the battery release buttons on the battery works and locks the
battery in the product.
X
Examine that the battery charger is not damaged and function correctly.
X
Make sure that the battery is not damaged.
X
Make sure that the battery is charged.
X
Make sure that the battery charger is not damaged.
X
Examine all cables, couplings and connections. Make sure they are not dam-
aged and free from dirt.
X
28
756 - 001 - 24.10.2018
Summary of Contents for 520iLX
