Husqvarna 520iLX, Operator'S Manual

Page: 21 / 40

2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
To do a check of the cutting attachment guard
WARNING: Do not use a cutting attachment
without an approved and correctly attached
cutting attachment guard. Always use the
recommended cutting attachment guard for
the cutting attachment that you use, see
Accessories on page 34 . If an incorrect or
faulty cutting attachment guard is attached
this can cause serious personal injury.
The cutting attachment guard stops objects that ejects in
the direction of the operator. It also prevents injuries that
occur if you touch the cutting attachment.
1. Stop the motor.
2. Do a visual check for damages, for example cracks.
3. Replace the cutting attachment guard if it is
damaged.
Battery safety
WARNING: Read the
warning instructions that
follow before you use the
product.
•
Only use the BLi battery.
Refer to
Technical data on
page 32
. The battery is
software encrypted.
•
Use the BLi battery that is
rechargeable as a power
supply for the related
Husqvarna products only. To
prevent injury, do not use the
battery as a power supply for
other devices.
•
Risk of electrical shock. Do
not connect the battery
terminals to keys, coins,
screws or other metal. This
can cause a short circuit of
the battery.
•
Do not use non-rechargeable
batteries.
•
Do not put objects into the air
slots of the battery.
•
Keep the battery away from
sunlight, heat or open flame.
The battery can cause burns
and/or chemical burns.
•
Keep the battery away from
microwaves and high
pressure.
•
Do not try to disassemble or
break the battery.
•
If the battery leaks, do not let
the liquid touch your body or
eyes. If you have touched the
liquid, clean the area with a
large quantity of water and
soap, and get medical aid. If
you get liquid in your eyes, do
not rub but flush with water
756 - 001 - 24.10.2018 21