manualshive.com logo in svg

Husqvarna 520iLX, Operator'S Manual

Share
Download
Husqvarna 520iLX Operator'S Manual Download Page 30

Troubleshooting

Keypad

LED display

Possible faults

Possible action

Green activate LED flashing

Low battery voltage.

Charge the battery.

Red error LED flashing

Overload.

The cutting attachment is jammed. deacti-

vate the product. Remove the battery. Clean

the cutting attachment from unwanted mate-

rials.

Temperature deviation.

Let the product cool down.

The power trigger and the acti-

vate button are pressed at the

same time.

Release the power trigger and the product is

active.

The product does not start

Dirt in the battery connectors.

Clean the battery connectors with com-

pressed air or a soft brush.

Error LED is lit with red light

The product needs servicing.

Contact your servicing agent.

Battery

LED display

Possible faults

Possible action

Green activate LED flashing

Low battery voltage.

Charge the battery.

Error LED flashing

The battery is discharged.

Charge the battery.

Temperature deviation.

Use the battery in surroundings where tem-

peratures are between -10°C (14°F) and

40°C (104°F).

Error LED is lit

Cell difference is too much (1V).

Contact your servicing agent.

30

756 - 001 - 24.10.2018

Summary of Contents for 520iLX









































Reviews:

No comments

Brands by name

Popular brands

Load more brands