11 SERVICE WORK ON THE CHASSIS
42
Finishing work
–
Remove the motorcycle from the lift stand. (
11.22
Removing the seat
B01925-10
–
Remove screw
1
.
–
Lift up the seat at the rear, pull it back and then remove it from above.
11.23
Mounting the seat
B01884-01
–
Hook in the front of the seat at the collar bushing of the fuel tank, lower it at the rear
and simultaneously it push forward.
–
Make sure that the seat is correctly locked in.
–
Mount and tighten the screw of the seat fixing.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)
11.24
Removing the air filter box lid
B01938-10
–
Release catch
1
, pull off the air filter box lid sideways in areas
A
and
B
, and
remove toward the rear.
11.25
Installing the air filter box lid
B01938-11
–
Position the air filter box lid and tab
1
. Engage the air filter box lid in areas
A
and
B
.
–
Engage tab
1
.