Husqvarna 2014 FC 450 EU, Owner'S Manual

Page: 26 / 99

9 SERVICE SCHEDULE
24
9.1 Service schedule
Every 30 operating hours - corresponds to about 210 liters of fuel (55.5 US gal)
Every 20 operating hours - corresponds to about 140 liters of fuel (37 US gal)
Every 10 operating hours - corresponds to about 70 liters of fuel (18.5 US gal) / after every race
Once after 1 operating hour - corresponds to about 7 liters of fuel (1.8 US gal)
Read out the fault memory using the Husqvarna diagnostics tool.
x
○ ● ● ●
Check and charge the battery.
x
● ● ●
Check the front brake linings. ( p. 57)
● ● ●
Check the rear brake linings. ( p. 61)
● ● ●
Check the brake discs. ( p. 55)
● ● ●
Check the brake lines for damage and leakage.
● ● ●
Check the rear brake fluid level. ( p. 60)
● ● ●
Check the free travel of the foot brake lever. ( p. 59)
● ● ●
Check the frame and swingarm.
x
● ● ●
Check the swingarm bearing.
x
●
Check the shock absorber linkage.
x
● ● ●
Conduct a minor fork service.
x
● ● ●
Conduct a major fork service. x
●
Check the tire condition. ( p. 66)
○ ● ● ●
Check the tire air pressure. ( p. 67)
○ ● ● ●
Check the wheel bearing for play.
x
● ● ●
Check the wheel hubs. x
● ● ●
Check the rim run-out.
x
○ ● ● ●
Check the spoke tension. ( p. 67)
○ ● ● ●
Check the chain, rear sprocket, engine sprocket, and chain guide. ( p. 50)
● ● ●
Check the chain tension. ( p. 49)
○ ● ● ●
Grease all moving parts (e.g., hand lever, chain, ...) and check for smooth operation.
x
● ● ●
Check/correct the fluid level of the hydraulic clutch. ( p. 53)
● ● ●
Check the brake fluid level of the front brake. ( p. 56)
● ● ●
Check the free travel of the hand brake lever. ( p. 55)
● ● ●
Check the steering head bearing play. ( p. 37)
○ ● ● ●
Check the valve clearance.
x
○ ●
Check the clutch.
x
●
Change the engine oil and oil filter and clean the oil screens.
x
( p. 77)
○ ● ● ●
Check all hoses (e. g. fuel, cooling, bleeding, drainage) and sleeves for tearing, leaks and incorrect routing. x
○ ● ● ●
Check the antifreeze and coolant level. ( p. 71)
○ ● ● ●
Check the cables for damage and routing without sharp bends.
x
● ● ●
Check that the cables are undamaged, routed without sharp bends and set correctly.
○ ● ● ●
Clean the air filter and air filter box.
x
( p. 43)
● ● ●
Change the glass fiber yarn filling of the main silencer. x ( p. 45)
●
Check the screws and nuts for tightness.
x
○ ● ● ●
Change the fuel screen.
x
( p. 76)
○ ● ● ●
Check the fuel pressure.
x
● ● ●
Check idle.
○ ● ● ●
Final check: Check the vehicle for safe operation and take a test ride.
○ ● ● ●
Read out the fault memory after the test ride using the Husqvarna diagnostics tool.
x
○ ● ● ●
Make the service entry in Husqvarna Dealer.net and in the service booklet.
x
○ ● ● ●
○
One-time interval
●
Periodic interval