Husqvarna Viking Mega Quilter, User Manual

Page: 22 / 44

20
E
F
H
G
I
D
J
Operating your MEGA QUILTER™
5. Holding the thread with both hands,
draw the thread down and around the
tension dial from right to left.
6. Pull the thread up to insert it between
the tension disks (D) and pass it over the
tail of the check spring. Pull the thread
down over the loop of the check spring
(E).
7. Draw the thread under the thread guide
(F) and through the second thread guide
(G). Pass the thread through the eye of
the take-up lever (H).
8. Pass the thread through the thread guide
(G) again.
9. Slip the thread into the thread guide (I).
10. Draw the thread down to the needle bar
thread guide (J), then pass the thread
through the needle eye.