Husqvarna Viking Designer Ruby Royale, User Manual

Page: 126 / 134

10:4
The Machine Skips Stitches
Did you insert the needle properly? Insert needle correctly as described in chapter 2.
Did you insert a wrong needle? Use needle system 130/705 H.
Is the needle bent or blunt? Insert a new needle.
Did you thread the machine properly? Check how the machine is threaded. If needed rethread the machine.
Is the correct presser foot used? Attach correct presser foot.
Is the needle too small for the thread? Change the needle.
Is the fabric moving up and down with
WKHQHHGOHZKHQ)UHH0RWLRQVHZLQJRU
embroidering?
$WWDFK6HQVRU4IRRW
The Seam has uneven Stitches
Is the thread tension correct? Check needle thread tension and the threading.
Are you using too thick or slubbed thread? Change the thread.
Is the bobbin thread evenly wound? Check bobbin winding.
Is a correct needle used? Insert a proper needle correctly as described in chapter 2.
The Machine does not Feed or Feeds Irregularly
Did you thread the machine properly? Check how the machine is threaded. If needed rethread the machine.
Has sewing lint collected between the feed teeth? Remove the needle plate and clean the feed teeth with a brush.
)UHH0RWLRQVHWWLQJLVRQ" 7XUQRII )UHH0RWLRQVHWWLQJLQ6HZLQJ0RGH
Is the correct presser foot used? Attach correct presser foot.
Thread loops are forming on the underside of the embroidery design
Has the embroidery built up too much to
move freely under the presser foot?
$WWDFK6HQVRU4IRRW
,I XVLQJWKH5IRRWLQFUHDVHWKHSUHVVHUIRRWKHLJKWLQ0DFKLQH6HWWLQJVLQ
6(7PHQXLQVPDOOVWHSVXQWLOSUREOHPLVVROYHG
The Embroidery Design is Distorted
Is the fabric hooped properly? The fabric must be tightly hooped.
Is the inner embroidery hoop completely inserted
in the outer embroidery hoop? Hoop the fabric in such a way that the inner hoop exactly matches the outer hoop.
Is the area around the embroidery arm free? Clear area around the embroidery unit.
The Embroidery Design has Puckered
'LG\RXVWDELOL]H\RXUIDEULFVXIÀFLHQWO\" (QVXUH\RXXVHWKHSURSHUVWDELOL]HUIRU\RXUWHFKQLTXHRUIDEULFW\SH
The Machine will not Embroider
Is the embroidery unit attached? Make sure that the embroidery unit is properly attached into the socket.
Is the wrong hoop attached? Slide on the correct hoop.
Non-original Parts and Accessories
The warranty does not cover any defect or damage caused by use of non-original accessories or parts.