Husqvarna Viking Designer Ruby Royale, User Manual

Page: 62 / 134

4:16
2. Sewing direction for buttonholes without satin stitches or
satin stitch buttonholes sewn with presser foot C
When sewing buttonholes without satin stitches or when
XVLQJSUHVVHUIRRW&WKHVHZLQJVWHSVDUHGLIIHUHQWWKHUHLV
QRVWUDLJKWVWLWFKVWHS6HHLOOXVWUDWLRQ
Note: If you are sewing buttonholes in a very narrow area, snap
on the standard foot C and sew your buttonhole according to the
instructions below.
MANUAL BUTTONHOLE
To sew a manual buttonhole, use buttonhole foot C.
‡ 6HZWKHÀUVWFROXPQDVORQJDV\RXZDQWWKH
buttonhole to be.
• Press the reverse button. The machine sews the
bartack and the second column.
• When the columns are aligned, press the reverse
button to sew the second bartack.
EMBROIDERED BUTTONHOLE
Buttonholes can also be stitched out in an embroidery
KRRS6HHSDJH
PROGRAMMABLE BUTTON SEW ON
6HZEXWWRQVVQDSVKRRNVDQGH\HVTXLFNO\ZLWK\RXU
machine.
FABRIC
:
Woven medium.
SELECT
:
Woven medium and Button on the Exclusive
6(:,1*$'9,625
™ feature. The feed teeth are lowered
automatically.
USE
:
6L]HQHHGOHDQGWKH
multipurpose tool to create a
WKUHDGVKDQNDVUHFRPPHQGHG6QDSRII SUHVVHUIRRW
SEW
:
• Place fabric, multipurpose tool and button under the
ankle with the holes in the button lined up with the
swing of the needle. Check the swing of the needle
using the mirror side-to-side button to be sure the
needle will not hit the button. Adjust stitch width if
needed. Bring the needle down into the hole of the
button.
‡ 6HWWKHQXPEHURI VWLWFKHVWRVHZRQWKHEXWWRQVHH
SDJHVWLWFKHVLVQRUPDO
• The machine stitches the button and automatically ties
off.
Note: Place the thin end of the multipurpose tool under the button
when sewing on light fabrics. Use the thick end for heavier fabrics.
Hold in place on the fabric with transparent tape.
Note: The recommended width of 3.0 is set for most buttons. If you
VHZDWLQ\EXWWRQRUDYHU\ODUJHFRDWEXWWRQGHFUHDVHîRULQFUHDVH
(+) the stitch width until the swing of the needle sews in the holes of
the button or snap.