5 | DOC-630-HU EN REV01
ORIGINAL INSTRUCTIONS
GROUNDING REQUIREMENTS
This power unit must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric shock.
This power unit has a power cord of at least 1.65 m (5.4 ft) in length and is equipped with a
grounding conductor and grounding plug. The plug must always be inserted directly into an
electrical outlet that is properly installed and grounded in accordance with all local codes and
regulations.
DO NOT USE AN EXTENSION CORD
.
WARNING:
Improper connection of the equipment grounding conductor can
result in a risk of electric shock. Check with a qualified electrician
or service person if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug provided with the
power unit – if it will not fit the outlet, have a proper outlet
installed by a qualified electrician.
The unit has a grounding attachment plug. Make sure that the
power unit is connected to an outlet having the same configuration
as the plug. No adapter should be used with this power unit. The
power unit should be connected to an independent circuit breaker.
ELECTRICAL REQUIREMENTS
This appliance is for use on a nominal circuit of 15 A at 110-120 Volts A.C. and 60 Hz.
G
eneral
Guidelines
to
be
observed
at
all
times
1�
The power unit must be installed in a ventilated area away from any
heat source;
2�
The Husky central vacuum system must be used only on dry
surfaces. At no time should the system be used to draw up liquids
nor should it be used to vacuum wet carpets or floors;
3�
It is mandatory that the filtration cage be equipped with its
permanent filter at all times when the system is in use;
4�
The motor housing must never be obstructed in any way to avoid
overheating or damaging;
5�
DO NOT vacuum gypsum dust, flour, mud, or any sludgy materials
as they will cake onto the filter and obstruct the filtration system
resulting in the overheating of the motor and thus failure of the
power unit to function properly;
6�
Do not attempt to shorten or modify the electrical power cord;
7�
As a security measure, unplug the electrical power cord before
proceeding with any maintenance;
8�
In order for the warranty to be valid, only a Husky authorized service
personnel may carry out the necessary repairs or maintenance on
the motor;
9�
The warranty will be void if non-recommended products such as
filters or any other after-sale parts as carbon brushes and motors
are used to repair the unit. Husky recommends strongly to use only
Husky certified filters and replacement part;
10�
Power unit must be positioned so that the plug is always easily
accessible;
11�
Pertaining to an electrified inlet valve (intended for the connection
of a current-carrying hose/motorized nozzle combination):
• Connect only a current-carrying hose to this wall valve;
• Do not install a wall valve outdoors;
• Do not use with a damaged hose; return hose to a service centre.
IMPORTANT
Husky is not responsible for damages resulting from improper
use. The warranty does not cover damage resulting from misuse
or problems resulting from installation that does not conform
to specifications, or any functional alterations and / or physical
changes to the power unit. Improper or non-recommended
installation of the system and / or power unit done against
predefined principles of the user manual is also considered misuse.
All conditions and restrictions are set forth in the Husky limited
warranty, the user manual and the system installation guide. To
optimize the performance and life of your Husky power unit, it is
important to do regular maintenance and cleaning of the filter
according to the guidelines listed in this user manual.
2. GENERAL GUIDELINES AND REFERENCE
Summary of Contents for SOLSTICE
Page 2: ......
