HUSKY INSTRUCTION MANUAL
5
consumption and make the cooling process slower (see section ‘Defrosting’)
• Turn the appliance off completely if it is not required for a period of days or longer to
avoid wasting energy (see also section ‘When your appliance is not in use’).
HANDLING YOUR APPLIANCE
This appliance uses R600a (Isobutane) natural refrigerant gas as part of its cooling system.
R600a is environmentally friendly but can be combustible. Care should therefore be taken when
handling or transporting the product to ensure that none of the refrigeration circuit components
are damaged.
• To lift the appliance safely, tilt it backwards by no more than 45 degrees, hold the base
and rear corners of the appliance carefully. Never use the door handles for lifting
• This appliance is heavy and could cause injury. Ensure there are adequate people
present to move the appliance
If moving the appliance:
• Remove all bottles
• Securely tape down the loose shelves inside the appliance
• Tape the door shut
• Protect the outside of appliance with a blanket, or similar item
• Ensure that the appliance stays in an upright position during transportation.
POSITIONING YOUR APPLIANCE
•
This appliance is a free standing appliance and should not be built in.
• Ensure that the appliance is situated:
• Away from direct sunlight and in a dry and well-ventilated space
• Away from stoves, ovens, radiators and any other heating appliances
• With a recommendation of at least 15cm clearance around the appliance
• Do not position the appliance in conservatories or outbuildings with extreme high or
low ambient temperatures
• Do not use outdoors or leave in rain
• Do not place anything on your appliance
• The appliance must be used in the vertical position and stand on an even, flat surface
for quieter operation
• If your appliance is to be to be placed on carpet, support it with a wooden board
underneath. Be aware that placing the appliance on carpet may mean that heat from
the compressor may cause the carpet to fade
• Ensure that the plug is easily accessible.
WARNING: When positioning the appliance ensure the supply cord is not
trapped or damaged. Do not locate extension sockets or charging transformers/
power supplies adjacent to the compressor at the back of the unit, as they could
overheat.
HUS-HM39-HN-M manual 0720.indd 5
HUS-HM39-HN-M manual 0720.indd 5
02/07/2020 14:17
02/07/2020 14:17
