2/15/2019
ROSbot manual · Husarion Docs
https://husarion.com/manuals/rosbot-manual/#rosbot-manual-overview
9/13
The ROSbot kit contains the Redox Beta charger. It is an universal charger, suitable for charging
NiCd, NiMH, Li-Po, Li-Fe, Li-Ion and Pb (AGM, VRLA) batteries. ROSbot shall be charged using an
included charger and cable.
Charger kit includes:
Redox Beta charger
AC/DC power adapter 100...240V to 12V 5A with 5.5/2.5mm plug on the 12V side
a cable to connect charger with ROSbot charging port
Quick charging guide:
1. Connect the power adapter to the charger and the output cable between charger and ROSbot
(2 connectors on charger side, 1 black connector to ROSbot charging port).
2. Use red and blue buttons to select “LiPo BATT” mode and press [Start].
3. Use arrows to select “LiPo CHARGE” mode.
4. Press [Start] - the current value should start blinking. Use arrows to set the current to 1.5A.
5. Press [Start] again - the voltage value should start blinking. Select “11.1V(3S)” using arrows. The
picture below shows the desired result.
6. Press and hold [Start] for 2 seconds. The charger should now ask for confirmation. Press [Start]
again. The charging process should begin now.
7. When the charging will be finished (after about 3 hours), the charger will generate a loud “beep”
sound and will finish charging at the same time.
