WORK
9
–
Connect the negative cable.
Info
Contact disk
must be mounted between battery terminal
and cable
socket
with the claws facing up.
–
Tighten the screw.
Guideline
Screw, battery terminal
M5
3 Nm (2.2 lbf ft)
–
Mount the seat. (
3.8
Setting kilometers or miles
Info
If you change the unit, the value
ODO
is retained and converted accordingly.
The values
TR1
,
TR2
,
A1
,
A2
and
S1
are cleared when the unit of measure is changed.
Condition
The motorcycle is standing.
400329-01
–
Press the button
briefly and repeatedly until
H
appears at the bottom right of the
display.
–
Press the button
for 3 - 5 seconds.
The Setup menu opens and the active functions are displayed.
–
Press the button
repeatedly until the
Km/h
/
Mph
display flashes.
Km/h adjusting
–
Press the button .
Mph adjusting
–
Press the button .
–
Press the button
for 3 - 5 seconds.
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
3.9
Setting the clock
Condition
The motorcycle is standing.
400330-01
–
Press the button
briefly and repeatedly until
CLK
appears at the bottom right of
the display.
–
Press the button
for 3 - 5 seconds.
The hour display flashes.
–
Set the hour display with the button
and/or button .
–
Press the button
briefly.
The next segment of the display flashes and can be set.
–
You can set the following segments in the same way as the hours by pressing
the button
and the button .
Info
The seconds can only be set to zero.
–
Press the button
for 3 - 5 seconds.
The settings are saved and the Setup menu closed.
Info
If no button is pressed for 20 seconds, or if no impulse comes from the
wheel speed sensor, the settings are automatically saved and the Setup
menu closed.
