background image

7

The generally applicable, legal and other binding national and international regulations 

pertaining to the prevention of accidents and protection of the environment apply and are to 

be implemented in addition to the operating instructions.

W A R N I N G   /   C A U T I O N !

The equipment 

is to be used exclusively

 for the 

purpose stated in the operating 

instructions (see chapter “Proper Use”)

.  Any other or further use is 

not considered 

proper use

. The manufacturer / supplier is not liable for any damages resulting from improper 

use. The user bears sole responsibility for such. 

Observance of the operating instructions and compliance with the inspection and maintenance 

conditions are part of the proper use. 

Never work when you are overtired or intoxicated!

The equipment is filled 

with a hydraulic fluid. 

These hydraulic fluids can 

be dangerous to health if 

swallowed or their vapours 

inhaled. Direct contact with 

the skin is to be avoided for 

the same reason. Please also 

note that hydraulic liquids can 

also have a negative effect on 

biological systems.

When working with or storing 

the equipment, ensure that 

the function and the safety 

of the equipment are not 

impaired by the effects of 

stark external temperatures 

or that the equipment is 

damaged in any way.  Please 

note that the equipment can 

also heat up over a long 

period of use.

Ensure adequate lighting 

when you are working. 

Before transporting the 

equipment, always ensure 

that the accessories are 

positioned such that they 

cannot cause an accident.

Always keep these operating 

instructions within reach 

where the equipment is used.

Ensure the proper disposal 

of all removed parts, left-over 

oil, left-over hydraulic fluid 

and packaging materials!

Summary of Contents for SP 333





































Reviews: