16
Working surface is too
small, tips slip off. Only
for increasing the size
of a gap (not suitable
for spreading)
Tips get a safe grip.
Only work with the tips,
so that the spreader
is not damaged in the
area of the light metal
arms.
7.2 Spreading
Use the front area of the tips for increasing the gap only. Full spreading capacity can be
achieved when approximately half of the grooved area of the tips is used. The greatest force
is created in the rear area of the spreading range of the tip (refer to images to follow).
WARNING / CAUTION!
The light metal alloy spreader arms may not be damaged.
The spreaders have additional exchangeable plates to protect the arms against physical
damage.
Spreading
Increasing a gap
approx 25 mm
approx. 1 in
Spreading is only allowed up to this point.
