GB |
Operating Instructions
GB-4
and shocks that could lead to Raynaud’s syndrome or
Carpal tunnel syndrome.
This condition reduces the ability of the hand to sense
and regulate temperature, causes numbness and a
sensation of heat, and can cause damage to the nervous
and circulatory systems and to necrosis.
Not all factors that lead to Raynaud’s syndrome are
known, but cold water, smoking, and illnesses that
impact the blood vessels and the circulatory system
and severe or long-lasting exposure to vibrations are
known to be factors that contribute to the development of
Raynaud’s syndrome. Observe the following instructions
to reduce the risk of Raynaud’s syndrome and Carpal
tunnel syndrome:
• Wear gloves and keep your hands warm.
• Make sure the device is well maintained. A tool with
loose components or with damaged or worn dampers
is prone to increased vibration.
•
Always hold the handle firmly, but do not grip it con
-
tinuously with excessive pressure. Take breaks often.
All of the precautions indicated above cannot exclude the
risk of Raynaud’s syndrome or Carpal tunnel syndrome.
Therefore, it is advisable in case of long-term or regular
use to monitor the condition of your hands and fingers
closely. Seek medical attention immediately if any of the
above symptoms appear.
Safety instructions
Attention!
Read all instructions contained
herein. Failure to observe the following
instructions may result in electric shock,
burns and/or severe injury. The term ‘power
tool’ used in the following includes both
mains-operated tools (with mains supply)
and battery-operated tools (without mains
supply).
KEEP THESE INSTRUCTIONS CAREFULLY!
1) Instructions regarding to safe handling
a)
Wear goggles or properly fitted safety glass
-
es, sturdy closed shoes with non-slip soles,
gloves, snug-fitting work clothes and ear
protectors (ear plugs or ear mufflers).
b) Minors should never be allowed to use an
electric trimmer. Never lend or rent your
electric trimmer without these operating
instructions.
c) Do not use the trimmer if other persons,
above all children, or animals are near the
working area.
d) Work calmly and stay alert. Operate the
trimmer under good visibility and daylight
conditions only.
e) Thoroughly maintain your power tool. Check
whether moving parts are working properly
and are not jamming/sticking, and whether
parts are broken or otherwise damaged in
a way that affects the function of the tool.
Have damaged parts repaired before using
the tool.
f) Do not use damaged power supply cords,
extension cords, couplings, plugs or cutting
heads.
g) Careless use can cause injuries to hand and
feet by the rotating cutting elements. Do not
switch on the unit when hands or feet are
near the cutting elements.
h)
Never use metal cutting devices.
i) Only use original spare parts.
j) Remove the battery before testing, cleaning
or working on the machine and when it is
not in use;
k) Inspect cooling air slots on the motor hous-
ing at regular intervals for clog-ups and
clean as necessary.
2) Maintenance
a) Children should be under supervision to en-
sure that they do not play with the device.
b) Any other work should be performed by your
dealer.
c)
Never use metal cutting devices.
d) Clean the cutting head at regular intervals.
e) Check the condition of the cutting head at fre-
quent intervals. If the behaviour of the cutting
head changes (vibration, noise), check imme-
diately as follows: Switch off the trimmer, hold
it firmly and bring the cutting head to a stand
-
still by pressing it against the ground. Then
disconnect plug from power supply. Check
condition of cutting head - look for cracks.
f) Have a damaged cutting head replaced
imme-diately - even if it only has superficial
cracks. Never attempt to repair a damaged
cutting head.
g) Inspect cooling air slots on the motor housing
at regular intervals for clog-ups and clean as
necessary.
h) Clean plastic parts with a damp cloth. Do not
use aggressive cleaning chemicals.
i)
Never hose down the electric trimmer!
j) Store trimmer indoors in a dry, high or locked
place and always keep out of reach of chil-
dren.
3) General Instructions
1. Read the instructions manual
Summary of Contents for HATI 18 LI
