Version November 2021
EN
7
HWT 160 SW – S User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
3
Machine Description
3.1
Component Overview
3.2
Transport, Storage, Shipment
The product ships on a palette with the accessories and tools.
Info
Immediately after receipt, make sure that the ship‑
ment is complete and in a good condition and no‑
tify the transporter of any defects or missing part.
Complaints at a later time may no longer be eligible
for remedy.
Important
When the user is done welding, the machine — in
particular its heating element — must not be stored/
wrapped before the heating element and, if they
are still fitted to it, the heating spigot and socket
have cooled down completely.
If the optional left‑hand and right‑hand pipe supports with
all‑purpose aligners are included in the delivery, they have
to be installed, in order to work with the machine, to the
support carrying the middle aligner, in the basic clamping
chassis, using the four supplied screws.
As they abut against one another, the ends of both pipe
supports form a recess that clasps around the support carry‑
ing the middle aligner (see the drawings on the next page
for reference). Fasten both to each other at this recess.
Clamps for Sad‑
dle Branch‑off
Heating Element with Spigot
and Socket Installed
Handwheel for the Basic Chassis
with Clamping Console
Handwheel for the Clamps of
the Clamping Console
Sheet Metal Frame/
Support Panel
Setpoint for Distance to
Detaching During Change‑over
Middle Pipe Support with
All‑purpose Aligner
Movable LH and RH Pipe
Supports with All‑purpose
Aligners
Clamping Console with
Bracket for Drive Power Tool
Setpoint for Fusion Depth