Version September 2018
EN
19
HÜRNER HST 300 Print 315 2.0 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
The portions “Hour,” “Minute,” “Day,” “Month,” and
“Year” are set separately. Press the START/SET key to con-
firm your settings.
10.1.3 Setting the Buzzer Volume
When the “Set Volume” sub-menu was selected, the screen
changes and the display reproduced in Display 18 appears.
The buzzer can also be heard. Turn the buzzer volume up
or down to the desired value using the
ï
,
ð
arrow keys
(from 0 to 100) and confirm your setting by pressing the
START/SET key.
10.1.4 Selecting the Temperature Unit
The unit of temperature values (Centigrade or Fahrenheit) can
be selected in a sub-menu similar to the language selection (see
Sect. 10.1.1).
10.2 Understanding the “Recording” Sub-menu
“Welder Code on” means that the welder identification
code has to be entered as set with “Welder Code Op-
tions,” “off,” that this is impossible.
“Commission Number on” means that the commission
number (job number) will have to be entered or con-
firmed before every new welding, “off” that the user
is not prompted to enter it.
“Print Tags – M – ” means that by pressing the MENU key,
the user can access a sub-menu for starting to print (a)
label(s) with reference to a given welding operation,
with the optional label tag printer.
Info
All data can also be read from a bar code with the
scanner, provided such a bar code is available.
11 Self-Monitoring Functions Overview
11.1 Errors During Data Input
11.1.1 Code Error
An erroneous input has occurred, a code tag is poor or has
an error in code symbology or code reading was improper.
11.1.2 No Contact
There is no properly established electric contact between
Displa18
Buzzer Volume
< ------20-------- >
Display 19
Data Recording
Welder Code on
>Commission No. on
Printing Tags -M-
