Version August 2017
EN
13
HÜRNER HCU 300 User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
Certain traceability data can also be accessed quickly, via
a selection screen, by pressing the
cursor key (see Dis-
play 6), either for viewing or for entering or changing/
confirming them.
6.2
Entering or Changing the Job Number
The commission number input screen is shown by the unit
before welding or accessed by the user in the quick access
screen (Display 6). It can be entered using the alphanumeric
keypad (see Info in Sect. 5.2) or by reading it from a bar
code using the scanner. The maximum length is 32 char-
acters. Confirm your input by pressing the START/SET key.
The job number will be saved to memory and will appear
in the printed welding report.
6.3
Entering or Changing Additional Data
The additional data input screen is shown by the unit
before welding, first the screen that allows entering the
first additional data, then the one for the second additional
data. This input can be entered either using the alphanu-
meric keypad (see Info in Sect. 5.2) or by reading from a
bar code using the scanner.
For the first additional data input, the maximum length
is 20 characters. For the second data input, the maximum
length is 15 characters. Confirm your input by pressing
START/SET. The additional data will be saved to memory
and appear in the welding report. By pressing STOP/RESET,
you skip this screen without any input.
Info
You are free to define any additional data you
see fit. For instance, you can put into these fields
information on pipe length, ditch depth, or com-
ments that help with welded joint traceability.
6.4
Entering the Fitting Traceability Code
If this feature is enabled in the configuration menu, after
the fitting code was entered, another input “Fitting Code”
is required. This is the so-called “traceability code” or
“second fitting code” of the fitting.
This input is entered either from a bar code using the scan-
ner or manually using the alphanumeric keypad (see Info
in Sect. 5.2). Press the START/SET key to confirm your input.
If the code entered is not correct, a “Code Error” message
appears; check the string of numbers and correct as needed.
If the code entered is correct, it is saved to system memory
and inserted into the welding reports to be printed. By
pressing the STOP/RESET key, you skip this input.
Display 7
Enter Job No.
********************
************
Display 8
Enter Add. Data 1
********************
Display 9
*** Fitting Code ***
********************
******
Summary of Contents for HCU300
Page 2: ......
