Version February 2022
14
EN
HÜRNER EasyWeld 110 (T) User’s Manual
H Ü R N E R S c h w e i s s t e c h n i k G m b H
Nieder-Ohmener Str. 26
35325 Mücke, Germany
versed once and work can go on with their second sharp
edge. When both edges are worn, the blades must be
replaced. Do not attempt to sharpen the blades on your
own, as such sharpened blades tend to be a hazard and
cannot ensure a proper facing outcome.
8
Service and Repair Contact
HÜRNER Schweißtechnik GmbH
Nieder-Ohmener Str. 26
Tel.: +49 (0)6401 9127 0
35325 Mücke, Deutschland
Fax: +49 (0)6401 9127 39
Web: www.huerner.de
Mail: [email protected]
Info
We reserve the right to make technical changes to
the product without prior notice.
Pursuant to the directive 2012/19/EU on waste electrical and
electronic equipment (so-called WEEE Directive), equipment
that was manufactured or distributed by ourselves may be
returned to us. To discuss the exact procedure to follow,
please contact us with the details above.
We also declare that equipment manufacture complies with
the directive 2011/65/EU on the restriction of the use of cer-
tain hazardous substances in electrical and electronic equip
-
ment (so-called RoHS Directive).
9
Product Components/Spares
Reducer 110 / 20 (set w/ 8 semicircular inserts) 360-110-020
Reducer 110 / 25 (set w/ 8 semicircular inserts) 360-110-025
Reducer 110 / 32 (set w/ 8 semicircular inserts) 360-110-032
Reducer 110 / 40 (set w/ 8 semicircular inserts) 360-110-040
Reducer 110 / 50 (set w/ 8 semicircular inserts) 360-110-050
Reducer 110 / 63 (set w/ 8 semicircular inserts) 360-110-063
Reducer 110 / 75 (set w/ 8 semicircular inserts) 360-110-075
Reducer 110 / 90 (set w/ 8 semicircular inserts) 360-110-090
Replacement facing blade
400-101-000
Narrow-profile clamps RH
200-260-061
Narrow-profile clamps LH
200-260-062
Welding neck support
200-260-063
Transport case
400-102-000
