Hurco winmax, Programming Manual

Page: 57 / 254

WinMax Lathe NC Programming
704-0115-307
Basic NC G Codes
2-9
G04 - Dwell
G04 programs a pause in part program execution. F is the only entry allowed in a G04
block. F Codes set the modal feedrate for cutting moves.
Default—No
Modal—No
Cancels—None
Table 2–3. G04 Dwell Examples
G06 - Probe/Block Skip
G06 arms the Probe mechanism and provides a means for stopping the axis, for instance,
when the torque is detected to be too high. Remaining Motion programmed after a high
torque detection is deleted from memory. Please refer to M186 - Activate Torque
Monitoring for W, on page 3 - 15 for details.
Active G Code F in the G04 Block Programs
G94 Feed Per Minute
Refer to G94 - Feed per Minute (default),
on page 2 - 45 for information about G93
and G94.
The number of seconds to dwell.
For example, the block G04 F2.1 pauses for
2.1 seconds before it executes the next block
of code.
G95 Feed Per Revolution
Refer to G95 - Feed per Revolution, on
page 2 - 45 for information about G95.
The number of spindle revolutions to dwell.
For example, the block G04 F10 pauses for 10
spindle revolutions before it executes the next
block of code.