Bosch OCL8850 Quick Reference Manual Download

Page: 1 / 2

OCL8850 Quick Reference Guide

Check wheel bearing.

Note: Rotor must remain in

place on hub at all times.

Remove wheel.

Fix all bolts/nuts and drive

adapter 50 Nm (37 ft-lb).

Remove caliper and clean

mounting surfaces.

Fit rubber silencer.

Fit adapter; bolts M10 or larger

[50 Nm (37 ft-lb)].

Fit lathe [50 Nm (37 ft-lb)],

place drive unit, and machine rotor.

Read and follow the instruction manual before assembling, installing, operating, or servicing the equipment.

577365 REV A

OCL 8850

Summary of Contents for OCL8850

Page 1: ...ts and drive adapter 50 Nm 37 ft lb Remove caliper and clean mounting surfaces Fit rubber silencer Fit adapter bolts M10 or larger 50 Nm 37 ft lb Fit lathe 50 Nm 37 ft lb place drive unit and machine rotor Read and follow the instruction manual before assembling installing operating or servicing the equipment 577365 REV A OCL 8850 ...

Page 2: ...shes red when active switch panel to operate slides power indicator light auto feed 6 mm min 0 24 inch min auto feed 12 mm min 0 47 inch min push once to start push once to stop direction indicator arrow speed adjustment 80 160 rpm direction start switch emergency stop handle bar height adjustment slow out fast out fast in hold button to operate slow in direction indicator arrow ...