Hurco winmax, Programming Manual

Page: 231 / 254

WinMax Lathe NC Programming
704-0115-307
ISNC M Codes
5-23
Sub-Spdl CW/CLNT On (ISNC M163)
M163 performs 2 functions at once:
• M163 turns the sub-spindle on in the clockwise direction. M63 will execute
after Tool, Spindle, and E (Work Offset) codes execute, but before motion
programmed in the block occurs.
• M163 commands the primary coolant pump to turn on, typically flood coolant.
Execute before tool change or motion.
Format
S3:M163
Sub-Spdl CCW/CLNT Off (ISNC M164)
M164 performs 2 functions at once:
• M164 turns the sub-spindle on in the counterclockwise direction. M64 will
execute after Tool, Spindle, and E (Work Offset) codes execute, but before
motion programmed in the block occurs.
• M164 commands the primary coolant pump to turn off. Execute before tool
change or motion.
Format
S3:M164
Sub-Spdl Off/CLNT Off (ISNC M165)
M165 performs 2 functions at once:
• M165 turns the sub-spindle off. M64 will execute after Tool, Spindle, and E
(Work Offset) codes execute, but before motion programmed in the block
occurs.
• M165 commands the primary coolant pump to turn off. Execute after tool
change or motion.
Format
S3:M165