15
OPERATING INSTRUCTIONS - ON THE HUMIDIFIER
WARM/ANION
Press once to ac vate the warm mist mode. Warm mist will
be
reached
within
15-20
minutes.
Maximum
warm mist temperature is 140F
.
Press again to enable the ioniza on mode
.
To
turn
off
the
ioniza on
mode
or
the
warm
mist
mode,
press
the
bu on
un l
you
get
the
desired
combina on.
Press and hold the bu on for a few seconds to turn the UV lamp on / off.
This
mode
is
not
shown
on
the
display. The ultraviolet lamp light can be seen through
the
side
openings
of
the
humidifier
or
when
you
remove the cover.
MIST OUTPUT SLIDER
Press the “MAX” indicator to turn on the maximum mist
power
or
“MIN”
to
turn
on
the
minimum
mist
power. You can also slide your finger across the panel to select any other
mist
output
level.
Only
5
power
levels are available
.
MIN MAX
WATER SHORTAGE
If there is not enough water in the water tank, the
device
will
automa cally
stop
working
and
enter
into
a Standby Mode. A water shortage symbol
will appear on the display and 3 warning beeps
will
sound
at
once. When the humidifier is in Sleep Mode, no warning beeps will be heard. Refill the humidifier with water
and switch the device on. Now it is ready for use.
If there is too much water in
the
water
tank,
the
display will show an EF symbol and the humidifier will
automa cally stop working. Pour out some
water from
the
water tank and switch on the device again. It will
operate in a current mode.
