37
·Check the electrodes of the Ignition Plug, adjust the distance between them to 0.6-0.7 mm. (Please use
a thickness gauge to measure)
·When installing the Ignition Plug, please put it in first, and then use a spanner to turn it half a round .
Caution:
·When the motorcycle stops, its engine can be extremely hot. Beware of
scalding yourself.
·Don’t use any ignition plug other than the designated one.
·If you often drive at a high speed, please use a high-heat ignition plug.
·if you often drive at a low speed (below 40 km/hr or in a cold area), please use a
low-heat ignition plug.
V.
Adhesiveness of the Machine Oil of the engine and Its Selecting Reference
1.
The adhesiveness of the Machine Oil of the engine
The choice of the Machine Oil of the engine is made according to the temperature in the area where the
motorcycle is driven. The chart on the right is the reference checklist for the choice of machine oil in
relation to the temperature.
·SEA is a unit of Adhesiveness, that is, the adhesiveness of the lubricating oil used by automobiles. The
machine oil is graded from the thinnest to the thickest and each grade is indicated with a number.
